This corner section is made from either solid polished brass or gun-barrel steel (blackened steel) and is designed to connect to our Andrew Nebbett Designs’ rolling ladder rails and work with our Andrew Nebbett Designs’ corner rolling ladder carriages.
Please be aware that the radius of this rolling corner unit is 600mm (24″), therefore adequate space is required. There will be approximately 50mm of straight rail at each end beyond the 90 degree section. This corner piece is designed to be mounted on cabinetry which features a 45 degree corner section, as illustrated in the images. If you would like to discuss different dimensions or would like further information about custom-made corner rolling rail systems, please contact us.
This rail system is secured by a single screw* into the wall/furniture for every wall fixing. Fully designed and handmade by our team, the rolling corner unit is made to order in our workshops in England.
Please be aware that due to the construction requirements of this corner radius section of rail, the heads of the wall-mounting bars will be visible on the front face of the tube (see photos).
*Screws are not provided as it is necessary for the installer to choose the appropriate fixtures for the material the rail is being attached to.
Through our Bespoke service we can supply this item in alternative sizes and finishes including nickel plated brass (shiny silver), antiqued brass and bronze coloured to name a few. Please contact us for further details.